# Dropsa Lubrication System Replacements

Canonical page: https://amagcnc.com/cross-reference/dropsa

AMAG supplies configured replacement systems for Dropsa lubrication equipment, including Single Line 01, 33V and Progressive Divider systems. We match the lubrication method, lubricant, required dose, pressure and number of points, then provide the AMAG pump, distributor, tubing and fittings needed for the machine.

## AMAG replacement packages

### AMAG replacement for Dropsa Single Line 01

Offer type: Configured AMAG replacement. Lubricant: Oil. Lubrication method: Resistance-type oil.

Recommended AMAG solution: AMAG resist-type distributor with a TZ, HL or NKHY pump.

Package supplied: Pump, Resist-type distributor, Tubing, Fittings and adapters, Machine-specific mounting.

[Configure this AMAG replacement](https://amagcnc.com/contact)

### AMAG replacement for Dropsa 33V

Offer type: Configured AMAG replacement. Lubricant: Oil or grease. Lubrication method: Fixed-dose volumetric.

Recommended AMAG solution: AMAG 34 Type, 35 Type or RH3 Type volumetric distributor with a TZ or HL pump.

Package supplied: Pump, Volumetric distributor, Tubing, Fittings and adapters, Pressure switch or timer where required.

The 35 Type's M12×1 port uses a PD35612 / PD35812 adapter to take standard tube.

[Configure this AMAG replacement](https://amagcnc.com/contact)

### AMAG replacement for Dropsa Progressive Divider

Offer type: Configured AMAG replacement. Lubricant: Grease. Lubrication method: Progressive grease.

Recommended AMAG solution: AMAG SD-series or U-Shaped progressive distributor with a ZJ or PJ grease pump.

Package supplied: Grease pump, Progressive distributor, Tubing, Fittings and adapters, Machine-specific mounting.

[Configure this AMAG replacement](https://amagcnc.com/contact)

## Frequently asked questions

**How does AMAG configure a replacement?**

AMAG matches the lubrication method your existing Dropsa system uses (resistance, volumetric or progressive), then configures the pump, distributor, tubing and fittings to your required output and number of points, configured around the existing installation.

**What information is needed for a replacement quotation?**

Send the Dropsa brand and model, a nameplate photo, lubricant type, number of points, required output, operating pressure, tube size and fitting details, plus your machine make and model. AMAG will return the recommended pump, distributor, tubing, fittings and control arrangement with a quotation.