SKIP TO CONTENT
Lubrication Systems

DK Type Single Distributor

Pick the code on your nameplate

0.05 ml per cycle, 46.5 mm long

Lubricant build
WhatsApp for a pricequoting DK-05Datasheet PDF ↓Photo of the nameplate is enough; send it with the chat.No part in hand? Tell us the machine, the number of lube points and the interval instead and we will name it.
DK Type Single Distributor

The DK Type Single Distributor meters one point from one small body. It is for the point a block distributor cannot reach: a single remote bearing, a point added after commissioning, or a machine with no room for a manifold. Five doses from 0.05 to 0.5 ml, in oil and grease (G suffix) builds.

How it works

The DK is a single-outlet volumetric distributor in a body small enough to sit at the lubrication point itself. It meters the same way a block does (charge on line pressure, deliver on take-off), but for one point only.

Used with PA and PB fittings on Ø4 tube, and combinable with a TH type connector, so a single awkward point gets a stated dose per cycle without running a branch back to a manifold. That makes it the usual answer for a point added after commissioning.

Five doses are available from 0.05 to 0.5 ml per cycle. Body length grows with dose, from 46.5 mm at 0.05 and 0.1 ml to 65.5 mm at 0.5 ml.

Specifications

Number of Outlets1
Discharge Capacity0.05 – 0.5 ml per cycle
Action Guarantee Pressure (Oil)12 – 15 kgf/cm²
Action Guarantee Pressure (Grease)30 – 40 kgf/cm²
Recommended Viscosity20 – 500 cst
Grease GradeNLGI 000# / 00# (G models only)
Outlet TubeØ4
Overall Length46.5 – 65.5 mm, by dose

Model matrix by order code

Lubricant build

Every code in the table below takes one of these, appended to the code when you order.

no suffix
Oil
G
Grease (G). NLGI 000# / 00# only. The two builds are not interchangeable.
CodeConfiguration
DK-050.05 ml per cycle, 46.5 mm long
DK-100.1 ml per cycle, 46.5 mm long
DK-200.2 ml per cycle, 53.5 mm long
DK-300.3 ml per cycle, 53.5 mm long
DK-500.5 ml per cycle, 65.5 mm long

The G suffix is the grease build. Oil models carry no suffix. The two are not interchangeable.

Dimensions

Ask us for the dimensioned drawing before machining a mounting.

How to read the order code

DK-30GDK single distributor · 0.3 ml per cycle · grease build.
1
Type
DK
2
Dose per cycle
05 = 0.05 ml · 10 = 0.1 · 20 = 0.2 · 30 = 0.3 · 50 = 0.5 ml
3
Lubricant build
G = grease · blank = oil

Before you order

  • Oil 20 – 500 cst; grease NLGI 000# and 00# only, and only on the G models.
  • The pump must have a pressure take-off mechanism, as with any volumetric distributor. Without pressure relief the piston never returns and no dose is delivered.

Warranty

One year against manufacturing defect from date of invoice.

How it pairs

The DK Type Single Distributor is commonly specified alongside the TZ Type Oil Lubrication Pump, the HL Type Oil Lubrication Pump, and the GM Type Grease Lubrication Pump. That is the same recommendation carried on its own datasheet, not a generic same-category suggestion.

Used on

Single remote lubrication pointsPoints added after commissioningMachines with no room for a block distributorVehicle and chassis circuits