Vogel Cross-Reference
Vogel (Willy Vogel AG, now SKF Lubrication Systems Germany) sells centralised lubrication under names including MonoFlex, ProFlex, DuoFlex and MultiFlex. MonoFlex's fixed-dose metering and ProFlex's progressive-block mechanism both line up with an AMAG duty class. This isn't a part-number match. Send the nameplate code and a photo and we'll confirm the exact one.
Which AMAG family matches your system
Vogel
MonoFlex (single-line metering devices)
Exchangeable metering nipples dose a fixed, pre-set quantity of lubricant per pump stroke, one nipple per outlet along a single main line.
AMAG's volumetric distributors (34 Type, 35 Type, RH3 Type) work on the same fixed-dose, positive-displacement principle, driven by a TZ or HL pump. The 35 Type and RH3 Type also run grease builds (RH3's G/GH) on the same principle. Click through for the pump each pairs with on that build. The 35 Type's M12×1 port also needs a PD35612 / PD35812 adapter from AMAG's fittings range to take standard tube.
Vogel
ProFlex (progressive system)
Lubricant is conveyed via a main line to a progressive distributor built from a progressive spool arrangement, dispensing to individual outlets in sequence for continuous supply through the pump cycle.
AMAG's SD-series and U-Shaped Integrated Progressive distributors use the identical sequential-block principle, both running on a ZJ or PJ grease pump. Each also pairs with a further pump of its own; click through for the full list.
What AMAG carries
Motor-driven gear pumps with level switch, timer options and pressure take-off.
35 kgf/cm² output for platens, tie bars and progressive block systems.
Volumetric, inspecting, progressive block and resist-type proportioning.
The plumbing between the pump and the point: fittings, hose and adaptors.
Frequently asked questions
Is an AMAG pump a direct replacement for my Vogel part?
Sometimes, but not automatically: output pressure, discharge rate and port thread all have to match before it's a safe swap. Send the nameplate code and a photo and we'll confirm rather than guess.
What should I send to get an answer?
The full code stamped on the nameplate, plus a clear photo of the plate itself. Lubrication pump and distributor order codes carry suffixes (outlet count, pressure class, voltage) that change the spec, and a partial code is a guess either way.
Does AMAG carry a replacement for Vogel's DuoFlex, MultiFlex or Oil+Air systems?
No. DuoFlex is a two-line reversing system AMAG's range doesn't cover, Oil+Air meters oil into a compressed-air stream rather than dosing oil or grease directly, and MultiFlex gives every point its own dedicated pump element rather than sharing one distributor block, a different architecture from any AMAG family. If one of these is on your machine, tell us on WhatsApp and we'll say so rather than offer a mismatch.
Identify your Vogel part
Send the nameplate code and a photo. We'll confirm whether an AMAG equivalent exists and quote it.