BAOTN Cross-Reference
BAOTN Intelligent Lubrication Technology is a Chinese manufacturer selling resistance-type, volumetric and progressive grease/oil lines under its own BS/BF/GF/GP model prefixes. AMAG's own range covers the same three duty classes. This isn't a part-number match. Send the nameplate code and a photo and we'll confirm the exact one.
Which AMAG family matches your system
BAOTN
Resistance-type oil systems (BSD / BSA / BSB / BSC)
Oil proportional joints and distributors meter thin oil to each point by calibrated flow restriction rather than a mechanical valve.
AMAG's resist-type distributors run the same restriction-based, single-line proportioning duty, driven by a TZ, HL or NKHY hand pump built without a pressure take-off mechanism, the same pairing AMAG's own datasheets specify for these distributors.
BAOTN
Volumetric oil and grease distributors (BF / GF series)
Straight-through quantitative distributor blocks deliver a fixed, measured dose of oil or grease per outlet per pump cycle.
AMAG's volumetric distributors (34 Type, 35 Type, RH3 Type) work on the same fixed-dose, positive-displacement principle, driven by a TZ or HL pump. The 35 Type and RH3 Type also run grease builds (RH3's G/GH) on the same principle. Click through for the pump each pairs with on that build. The 35 Type's M12×1 port also needs a PD35612 / PD35812 adapter from AMAG's fittings range to take standard tube.
BAOTN
Progressive grease systems (GP-series distributor blocks)
Sequential piston blocks discharge to each outlet in turn, each completing its stroke before the next fires.
AMAG's SD-series and U-Shaped Integrated Progressive distributors use the identical sequential-block principle, both running on a ZJ or PJ grease pump. Each also pairs with a further pump of its own; click through for the full list.
What AMAG carries
Motor-driven gear pumps with level switch, timer options and pressure take-off.
35 kgf/cm² output for platens, tie bars and progressive block systems.
Volumetric, inspecting, progressive block and resist-type proportioning.
The plumbing between the pump and the point: fittings, hose and adaptors.
Frequently asked questions
Is an AMAG pump a direct replacement for my BAOTN part?
Sometimes, but not automatically: output pressure, discharge rate and port thread all have to match before it's a safe swap. Send the nameplate code and a photo and we'll confirm rather than guess.
What should I send to get an answer?
The full code stamped on the nameplate, plus a clear photo of the plate itself. Lubrication pump and distributor order codes carry suffixes (outlet count, pressure class, voltage) that change the spec, and a partial code is a guess either way.
Does AMAG carry a replacement for BAOTN's oil-air (ETC/EFA) or spindle oil-mist (EV series) systems?
No. AMAG's range covers resist-type, positive-displacement and progressive-block oil/grease duty, not BAOTN's air-entrained cooling or spindle mist lines. If one of these is on your machine, tell us on WhatsApp and we'll say so rather than offer a mismatch.
Identify your BAOTN part
Send the nameplate code and a photo. We'll confirm whether an AMAG equivalent exists and quote it.