Chen Ying Cross-Reference
Chen Ying Oil Machine is a Taiwanese centralised-lubrication manufacturer selling CV Type progressive feeders and CAB/T Type volumetric distributors. AMAG's own range covers the same duty classes. This isn't a part-number match. Send the nameplate code and a photo and we'll confirm the exact one.
Which AMAG family matches your system
Chen Ying
CV Type Progressive Feeder
Cascading pistons discharge to each outlet in sequence, fed from a single supply line, for oil or grease duty.
AMAG's SD-series and U-Shaped Integrated Progressive distributors use the identical sequential-block principle, both running on a ZJ or PJ grease pump. Each also pairs with a further pump of its own; click through for the full list.
Chen Ying
CAB / T Type Volumetric Distributor
Piston-based positive-displacement metering, one piston per outlet, delivering a fixed dose of oil per pump cycle.
AMAG's 34 Type covers the same oil-only, positive-displacement duty; the 35 Type and RH3 Type extend the same principle to grease if your circuit needs it. All three run on a TZ or HL pump; the 35 Type's M12×1 port also needs a PD35612 / PD35812 adapter from AMAG's fittings range to take standard tube.
What AMAG carries
Motor-driven gear pumps with level switch, timer options and pressure take-off.
35 kgf/cm² output for platens, tie bars and progressive block systems.
Volumetric, inspecting, progressive block and resist-type proportioning.
The plumbing between the pump and the point: fittings, hose and adaptors.
Frequently asked questions
Is an AMAG pump a direct replacement for my Chen Ying part?
Sometimes, but not automatically: output pressure, discharge rate and port thread all have to match before it's a safe swap. Send the nameplate code and a photo and we'll confirm rather than guess.
What should I send to get an answer?
The full code stamped on the nameplate, plus a clear photo of the plate itself. Lubrication pump and distributor order codes carry suffixes (outlet count, pressure class, voltage) that change the spec, and a partial code is a guess either way.
Does AMAG carry a replacement for Chen Ying's COM oil-mist pneumatic lubricator?
No. AMAG's range covers resist-type, positive-displacement and progressive-block oil/grease duty, not COM's air-entrained mist delivery. If that's what's on your machine, tell us on WhatsApp and we'll say so rather than offer a mismatch.
Identify your Chen Ying part
Send the nameplate code and a photo. We'll confirm whether an AMAG equivalent exists and quote it.